Blue Cat5e Cable 1000ft Plenum:
This is a plenum rated cable that is of category 5 enhanced. It has an outer jacket that is blue in color. This cable is not only ideal but in fact, it is recommended for plenum space. A plenum space is a certain area through which air goes around the perimeter of a structure. And because of this air circulation, there exists a high oxygen content in these areas, and oxygen makes the area very sensitive to fire. A plenum space can readily catch fire, therefore, the cables installed in them should have special insulation which can resist the flames. We recommend you use our blue cat5e cable 1000ft plenum in plenum spaces because not only it is a plenum rated cable, but it is also made keeping in view the National Fire Protection Association NFPA 90a standard.
Moreover, it contains high specifications for which it has been stringently tested. The cable is TIA/EIA verified, RoHS compliant. It has been tested against its specifications for high data transfer speeds, bandwidth capacity, excellent attenuation, ability to cut down cross-talks, data integrity and so on. It is capable to support up to 350 MHz and also, it can support up to 1000 Mbps gigabit speeds. Furthermore, it has been tested to support up to 1000 Mbps gigabit speeds. It can perfectly support GbE (Gigabit Ethernet/1000Mbps) up to 100 meters. This Blue cat5e cable 1000ft plenum is recommended for high-performance Ethernet applications. It is ideal to be used for 10Base-T (Ethernet IEEE 802.3), 100 Vg-Any LAN (IEEE 802.12), 100Base-TX (Fast Ethernet IEEE 802.3u), TP-PMD (ANSI X3T9.5), 1000BASE-T (Gigabit Ethernet GbE), and generally for applications where high bandwidth and high data rates are required.
The Blue cat5e cable 1000ft plenum has tighter twisted pairs and stronger and thicker sheathing in comparison with a regular cat cable. This cable is a 24 American Gauge Wire AWG, which is made of four unshielded twisted pairs and eight solid copper conductors. The insulation on the external part of the cable is of high-density polyethylene (HDPE) insulation and the outer jacket is tested to be plenum rated. Because this cable has a twisted pair design inculcated in it, and it has strong and thick sheathing, it is highly efficient in cutting down cross-talks. Cross talks occur when there is confusion between one single from a cable with another signal in another cable that is close by the first cable. Thus, if you are running cables close to each other, and the data is being transmitted at high frequency, then you should make sure that this cross talk problem is minimized. In comparison with the regular cat5 cable, this cable is designed to provide more protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). This means that the integrity of your data will be protected and there will be a reduction in the loss of data packets while the data travels through the cables