Pros and Cons of using Bulk Cat6 Riser Cable

Using Cat6 riser Bulk Cable

Bulk ethernet cables are the most commonly used networking cables. More specifically, the bulk Cat6 riser cable is used in almost all buildings whether commercial or residential. There are reasons for its wide use. It is affordable, reliable, and provides unparalleled performance in both home and office networks. But using this cable comes with its disadvantages as well.

If you are also looking to buy the Cat6 riser cable 1000ft for your residential or commercial network, you need to know its pros and cons. So in this article, we will walk you through the lesser know benefits and downsides of using this riser cable.

Let’s dive in.

Category 6 Specifications

One thing is granted with the category 6 riser ethernet cable. That is, it comes with the revered Cat6 specifications. No matter which variant of the cable you get, you will always benefit from the Cat6 gigabit data transfer rates, PoE compatibility, and high reliability in general.

For instance, Cat6 cables have a data transfer rate of up to 1 Gbps over a length of 100 meters and a bandwidth capacity of 550 MHz. You can increase the data transfer speed exponentially by running the cable at just below 50 meters. And the bandwidth capacity is ideal for all high-speed ethernet applications such as online streaming, audio/video streaming, online gaming, etc.

The Cat6 riser pure copper cable is also backward compatible with the previous ethernet cable categories and terminates easily in RJ45 keystone jacks that are compatible with 23 AWG wires. The wires of the cable are twisted in pairs and are made out of bare copper or copper-clad aluminum. More on conductors in the later part of the blog.

Heavy-Duty Riser Jacket

The riser jacket in which the Cat6 riser solid copper cable comes is made out of fire-extinguishing materials. What this means is that when in a fire hazard, the cable jacket does not catch a flame, nor carry it. In fact, it extinguishes the fire and prevents the propagation of the flame along the cable. To ensure this safety feature, the cat6 riser cable undergoes a vertical fire safety test.

The riser cable jacket is designed to be installed on indoor vertically rising spaces such as elevator shafts, between floors, and inside walls. For instance, if you need to run a LAN cable from your server room to a wall plate, you will need to run this cable and connect it with the RJ45 Keystone Jack. It is also pivotal in ensuring the prevention of fire propagation from one floor to another.

Although it is very unlikely for Cat6 riser 1000ft cable to catch flame and burn, if it does; it can emit small amounts of toxic gases. In outdoor environments, it cannot be a problem but when installed indoors, it can be a serious hazard. Therefore, it is mandatory to install it in enclosed spaces where air does not flow.

Interestingly, the reason for its common use is its jacket which allows installations in both indoor and outdoor setups.

Pure Copper Conductor

The bulk Cat6 riser cable comes with CCA and pure copper conductors. The one we recommend is solid pure copper. It is made out of 23 AWG wires that are twisted in pairs of two. The twists in the conductor pairs help in minimizing the EMI and crosstalk and ensure a clean transfer of your data.

Cat6 riser solid copper cable is also corrosion resistant and ductile. This means you can give it any shape your want by twisting and turning it. In the long run, the bare copper Cat6 riser cable holds impeccably well in uncertain environments.

This conductor also makes it the most ideal option for Power over Ethernet applications. CCA cables are not ideal, in fact not recommended for PoE applications.

Pros and Cons: Cat6 Riser Copper Cable

As mentioned, the cable Cat6 riser bulk comes with both pros and cons. And here’s the list.


  • Heavy-duty protection against safety hazards.
  • Easy to install.
  • Affordable.
  • Can be used outdoors as well.
  • Everlasting


  • Potential to emit toxic smoke.
  • Can’t be installed in plenum spaces.

Evidently, the only disadvantages of the Cat6 riser 1000ft cable are its potential to emit toxic smoke and incompatibility with plenum spaces. Other than these two disadvantages, all the cable offers are advantages such as affordability, reliability, long-lasting performance, and last but not the least, a strong signal relay.


In short, the bulk Cat6 riser, also known as the category 6 riser 1000ft cable has fewer cons as compared to the advantages it offers. If you can compromise on not being able to install it in plenum spaces, then you do not have to worry about its tendency to emit toxic smoke. Because if you are installing it in enclosed spaces or outdoors, the fire safety concern is rendered redundant.

Specification Cat5e Cat6 Cat6a
Cable Jacket Plenum, Riser & PVC Plenum, Riser & PVC Plenum & Riser
Wire Gauge 24-AWG 23-AWG 23-AWG Highly Twisted
Frequencies 350 MHZ 550 MHZ 750 MHZ
Installation Temp 0°C to 60°C 0°C to 60°C 0°C to 60°C
Pairs 4 Twisted Pairs 4 Twisted Pairs 4 Twisted Pairs
Package Easy Pull Box Easy Pull Box Wood Spool
Colors Black, Blue, White, Red, Green, Yellow Black, Blue, White, Red, Green, Yellow Black, Blue, White, Red, Green, Yellow

Leave a Reply

Main Menu