Bulk Cat6a Plenum 1000FT Cable Ethernet UTP – In Blue
- Cat6a CMP O.D. 8.1 ± 0.2 mm
- Wire Guage 23AWG
- Conductor is 4 Twisted Pairs
- Frequency is 750MHz
- Jacket & Shielding is FEP – Unshielded
Bulk Cat6a Plenum 1000FT Cable:
New York Cables aims to provide you with the highest quality category 6 augmented bulk cat6a plenum 1000ft cable which are highly recommended to be used in applications involving 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 750 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps ATM PoE (Power over Ethernet), and indoor voice, data, video, and security networking applications in general as well are inclusive in this recommendation.
This particular type of a cable is a special high-performance cable which has a plenum rated outer jacket: what that means is that the cable’s entire length is coated with fire retardant materials. Our bulk cat6a plenum 1000ft cable is made of 23 American Wire Gauge AWG copper conductors and has four tightly twisted pairs (therefore eight solid conductors) with high-density polyethylene (HDPE) insulation on top and a plenum rated outer Jacket containing fire retardant properties. The mentioned fire resistive properties are essentially required for a cable to be installed in plenum spaces. Plenum spaces are those spaces through which air circulates around for various purposes, for instance, ventilation. These spaces tend to have a large amount of oxygen due to which the cable installed are susceptible to fire, and further in case of fire, to a vigorous spread of flames. This cat6a plenum cable is highly efficient with its fire resistive properties, and additionally, it does not burn with notorious harmful-to-health fumes. Moreover, the outer jacket has the property to restrict flame progression in case of an outbreak of fire.
Our Cat6a Plenum cables are capacitated to be suitable for up to 650 MHz and unlike the regular Cat6 cables, they can support up to 10 Gigabit Ethernet at 100 meters. Along with that, the Cat6a Plenum cables also are highly effective in reducing cross-talks between cables because of the cables being thicker. This thickness makes the cables more resistant to Near End Crosstalk (NEXT) and Alien Crosstalk (AXT); this all, in turn, ensures greater data integrity with reduced packet loss and delay in cables. The Augmented category 6 cable is more sophisticated in cutting down the various cross talks mentioned when compared to the regular category 6 cables. We ensure you that with our cat6a plenum rated cable; your Ethernet network setup will not face signal degradation or signal bleedings.
We have a wide range of jacket colors available for this sort of cable so that you can set up a color-schemed network. Furthermore, the cables come in a standard length of 1000FT on sturdy wooden spools so that it is convenient for you to handle and store the length of the cable after the desired length is measured, cut and terminated from the bulk.
|Cable||Cat6a CMP O.D. 8.1 ± 0.2 mm|
|Wire Gauge||23 AWG|
|Conductor||O.D. 1.06 – 1.10 mm – 4 Twisted Pairs|
|Jacket & Shielding||FEP – Unshielded|
|Installation Temp||0°C to 60°C|
|Bending Radius||4 x Overall Diameter|
|PoE||IEEE 802.3af / IEEE 802.3at (PoE+)|
|Applications||IEEE 802.3 an, 1GB, 10GBase-T and Legacy speeds|
|Spline Separating||4 pairs|
|Color||Blue, White, Yellow, and Green|
|Length & Package||1000 Feet on wooden reel|