1000ft Cat6 Plenum Cable CMP Solid Conductors Pull Box

(5 customer reviews)

Price: $169.99

Availability:

255 in stock

BlueWhiteGreenYellowRed
1000 FT
Clear
Compare

Cat6 Plenum:

1000ft cat6 (short for Category 6) plenum cable has all the specifications that you need for a high-speed Ethernet. Our 1000ft cat6 plenum cable features certifications of the data transfer rate of 10/100/1000 Mbps and a gestation of up to 550 MHz which in turn results in its LAN applications like 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps ATM PoE (Power over Ethernet).In addition to that, horizontal networking applications over distances up to 100 meters are also catered after for. Cat6 plenum is made using four twisted pairs of 23 American Gauge Wire (AWG) with solid conductors. The cable is TIA/EIA verified, RoHS Compliant and they have CMP – Plenum rated jacket.

Our cat6 plenum cable is different from a riser cable or a vertical cable and also from a PVC cable. It is to be noted that electronically these cables are the same; however, the difference lies in the outer sheathing. The sheathing on the external part of this particular cable is of high-density polyethylene (HDPE) insulation and the outer jacket is tested to be plenum rated. Now, if you are to install cables in a plenum space, then in accordance with the code in your state, you must install only plenum rated cables in such a space. These cables have special insulation which has fire retardant characteristics to it. The plenum spaces are the spaces in a building which is an event of a fire can make the fire progress fast because these are the places through which air circulates and there is a high level of oxygen in them. We suggest you run our 1000ft cat6 plenum cable in your plenum spaces because, in addition to its superior electronic characteristics, it will not melt off with toxic fumes in an event of a fire. We manufacture our plenum cables in accordance with the National Fire Protection Association NFPA 90a standard.

To main great stability in your data transmissions and in your connectivity overall, New York Cables has made sure that the twisted pairs are taunted enough and that the outer sheathing is thick enough so that cross talks are minimized to a great extent. If you are to run multiple cables parallel to each other, you would want to consider cross talks; which basically ruin your data integrity by producing undesired effects when signal bleeds from one cable and overlaps with a signal from another cable that is running close by. Our 1000ft cat6 plenum cable is intended to give enhanced protection against Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT).

 

CableCat6 CMP 0.57±0.01mm
Wire Gauge23 AWG
Conductor0.57±0.01mm – 4 Twisted Pairs
Frequency550 MHz
Jacket & ShieldingCMP Jacket – Unshielded
Installation Temp0°C to 60°C
Standard CompliancesISO/IES ROHS Compliant
Velocity Ratio65%
Applications100 Base-T4 – 100 Base-TX – 100VG – Any LAN – 1000 Base-T (Gigabit Ethernet) – 155 Mbps ATM – 622 Mbps AT
Spline Separating4 pairs
ColorBlue, White, Yellow, Green, and Red
Length & Package1000 Feet 305Meter – EZ Pull Box

Based on 5 reviews

5.0 overall
5
0
0
0
0

Add a review

  1. Mark Robinson (verified owner)

    Excellent product – easy pull boxes with no tangles. Fast delivery and good communications with sales person.

    Mark Robinson

  2. Brian Larson

    Top notch quality Cable with great frequency rate.

    Brian Larson

  3. Shane Thomas

    Their CAT6 Plenum Cable is better than Mohawk! Not a single kink.

    Shane Thomas

  4. Dawn T (verified owner)

    I get prompt service and reliable delivery! Only place we order from and quality is always top notch!

    Dawn T

  5. Bobby Steel

    Quality Cables. No kinks while pulling cables out.

    Bobby Steel