Cat6 Riser Solid Copper 1000ft Ethernet UTP Cable – In Blue
- Cat6 CMR Solid Copper 0.57±0.01mm
- Wire Guage 23AWG
- The conductor is 4 Twisted Pairs
- Frequency is 550MHz
- Jacket & Shielding is CMR Jacket – Unshielded
Cat6 Riser Solid Copper 1000ft:
Our category 6 cables provide you with ultimate performance and quality. It intended to provide you with high bandwidth capacity, high data transfer rates, high data integrity, reduced cross-talks and so much more. The cable is thoroughly tested for all the category 6 standards, and industry norms. The cable is TIA/EIA verified, ETL listed and RoHS compliant, and you can use this cable ideally for 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550mhz broadband video voice, T1, ISDN 155/ 622 Mbps, and ATM PoE (Power over Ethernet). This particular sort of Cat6 cable is the one that contains 100% solid copper conductors and it is covered with a riser-rated outer jacket in white color. This Cat6 riser solid copper white cable has several remarkable specifications like it is suitable to support bandwidth capacities up to 550 MHz and data transfer rates of 1 Gbps.
This Cat6 riser solid copper white cable features 23 American Gauge Wire, four unshielded twisted pairs and eight conductors in total. The twisted pair design inculcated in our cables is a market standard, which really helps in cutting down cross-talks and other electromagnetic interferences. Cross talks can simply be understood as a nuisance. It is a phenomenon or let’s just say; an undesired effect, which usually occurs when a signal from one cable confuses and overlaps with a signal from another cable that is running nearby. Cross talks can make the quality of your transmissions go down and therefore, this problem needs to be dealt with. For the purpose, we have exactly what you should be needing. This Cat6 riser solid copper white cable comes with tighter twists, and thick sheathing and, therefore, it has the ability to resist various sorts of cross-talks like Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). As a result of the ability to resist cross talks, the data integrity of your transmissions is improved, and a decline in loss of data packets is achieved.
This particular cable has a riser rated outer jacket. The first thing that you need to look out for is the outer jacket or the insulation of any cable when you are supposed to install it. Only plenum-rated jacketed cables are recommended for plenum spaces and others like PVC or riser-rated ones for non-plenum applications. A plenum space can easily catch fire because there is air in them which circulates through them. Therefore, only the cables with strict fire ratings i.e. plenum cables are suitable for such spaces. Our riser rated cables like this one is not to be installed in plenum space. It is perfect for non-plenum vertical applications with no environmental air. Our riser cables carry a special self-fire extinguishing characteristic and they are designed to be used in vertical applications for which they are tested for a vertical burn test. They are suitable to prevent the spread of fire from one floor to another floor.
|Cable||Cat6 CMR Solid Copper 0.57±0.01mm|
|Wire Gauge||23 AWG|
|Conductor||Solid Copper 0.57±0.01mm – 4 Twisted Pairs|
|Jacket & Shielding||CMR Jacket – Unshielded|
|Installation Temp||0°C to 60°C|
|Standard Compliances||ISO/IES ROHS Compliant|
|Applications||100 Base-T4 – 100 Base-TX – 100VG – Any LAN – 1000 Base-T (Gigabit Ethernet) – 155 Mbps ATM – 622 Mbps AT|
|Spline Separating||4 pairs|
|Color||Blue, White, Yellow, Green, and Red|
|Length & Package||1000 Feet 305Meter – EZ Pull Box|
|Dimensions||8 × 17 × 18 in|