Everything you need to know about Ethernet Cable Problems and their Solutions

Ethernet Cable, Problems and Solutions

Ethernet cable is an integral part of any network or electrical system. If there is some fault with the cable, it can affect the performance of the whole network. These cables need constant checking to avoid any surprise in the future.

In this article, we’ll talk about the various problems and solutions regarding these cables.

Slow Connections with Ethernet Cable

Damaged cables are the main reason behind slow connections. If the outer jacket is damaged, it can also damage the internal wiring structure and signal strength. In this case, a short circuit becomes eminent. Bendy cables can also affect the performance of your network. Try straightening it with your hands but if that does not work then replace the cable as soon as possible.

Ethernet Cable

Lost Connections

When you plug the cable into the adapter and light does not blink, then you have a faulty cable. Your system would also show error messages as well. To avoid any trouble, make sure you have connected the cable properly and the adapter is working as well. If there is still no connection then try to replace the cable.

Restore Connection by Wiggling Ethernet Cable

This is one of the most effective ways to re-establish your connection. If you are doing it too often then you probably have a faulty cable. There is a built-in lever that secures the cable within the port. The drop in connection also means that there is something wrong with the port.

Check your Network Ecosystem

If you are constantly replacing your cables, you need to check the ecosystem of your network. If you have replaced a cable and it works fine then your system is fine. But if the same problem occurs over and over again, you need to thoroughly check your network. There are three types of issues you can look into.

Poor Performance with Ethernet Cable

If you are getting a slow speed in your network, you have a performance-related issue in your network. The reason behind it is damage or bendy cable. Visually scan the cable and look out for any sharp bends in the cable. If you find and bends, straightening the cable could be helpful. If it does not work, you need to replace the cable immediately.


This problem can occur due to some bad connectors. If you have any cut in the cable, continuity of the connection can be affected. The damaged jacket will result in electromagnetic interferences as well. Many devices can help you detect any interferences with the cable.


The connectivity issue occurs because of the faulty cables. Try plugging the cable into a different device, if the portlight blinks then you have nothing to worry about. If there is no blinking at all, you have a faulty cable and you need to replace it.

If you are looking to buy premium-quality ethernet cable at an affordable price with free shipping, you can order it from Newyork Cables.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Network Cables