Cat6 Plenum Bulk Cable 1000ft Ethernet UTP Cable – In Red
- Cat6 CMP 0.57±0.01mm
- Wire Guage 23AWG
- Conductor is 4 Twisted Pairs
- Frequency is 550MHz
- Jacket & Shielding is CMP Jacket – Unshielded
Cat6 Plenum Bulk Cable 1000ft:
Our Cat6 plenum bulk cable 1000ft red, blue, white, green color has all the market competent specifications. The cable is of great quality that supports high bandwidth speeds and data transfer speeds and is therefore for applications that require such speeds in addition with the secure and reliable transmission of data, reduced cross talk, improved data integrity, and low bit error rate.
This cat6 plenum bulk cable 1000ft is intended to handle LAN applications of up to 10 Gigabit Ethernet. It can cater for 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3 Gigabit Ethernet), TP-PMD (ANSI X3T9.5), 1000BASE-T (Gigabit Ethernet GbE), and 155 Mbps ATM and 622 Mbps ATM PoE(Power over Ethernet). Not only that, the cable comes in a standardized 1000FT bulk, the entire outer insulation of which has been tested for CMP (FT6) plenum ratings.
The cat6 plenum bulk cable 1000ft meets or rather exceeds industry standards. The cable is tested to support up to 550MHz bandwidth speed. With that, it can also support the data transfer rate of 10/100/1000 Mbps. The outer insulation of this cable of ours is plenum rated. Being plenum rated means that the cable itself can be used in airflow places i.e. the plenum spaces. These spaces can be any place where the air circulates in a structure. These plenum spaces are prone to catch fire. Therefore, the cables that are installed in these plenum spaces should have outer insulations to be plenum rated. As mentioned above, our 1000ft Cat6 plenum cable red color has been tested for CMP (FT6) plenum-ratings. Additionally, the cable’s plenum rated insulation also conforms to NFPA (National Fire Protection Association) 90a standard. When this cable is used in such areas, it acts as a barrier against the spreading of fire. Also, the cable does not burn away with toxic smoke because of the low-smoke insulation used in its manufacturing.
The cable has 23 AWG (American Wire Gauge) in four twisted pairs. This twisted pair design is set the industry standard because of which cross-talk between adjacent wires can be minimized. The cross talk is the unwanted interference in your signal transmissions which seriously affects your quality of the transmissions. Therefore, New York Cables has manufactured for the cat6 plenum bulk cable 1000ft which is really good in minimizing the cross-talks. This gives you smooth transmissions, with an overall reduction in the loss of data packets.
Apart from the red color of this cable’s jacket, there are other colors (available in blue, white, red and green color) for you to choose from. The cable comes in a bulk form which has a standardized length of 1000 Feet. The bulk is packed up pull-out boxes for your convenience. With all these qualities, New York Cables strives to offer the best price out there in the market for this cat6 plenum bulk cable 1000ft.
|Cable||Cat6 CMP 0.57±0.01mm|
|Wire Gauge||23 AWG|
|Conductor||0.57±0.01mm – 4 Twisted Pairs|
|Jacket & Shielding||CMP Jacket – Unshielded|
|Installation Temp||0°C to 60°C|
|Standard Compliances||ISO/IES ROHS Compliant|
|Applications||100 Base-T4 – 100 Base-TX – 100VG – Any LAN – 1000 Base-T (Gigabit Ethernet) – 155 Mbps ATM – 622 Mbps AT|
|Spline Separating||4 pairs|
|Color||Blue, White, Yellow, Green, and Red|
|Length & Package||1000 Feet 305Meter – EZ Pull Box|
Blue, Green, Red, White, Yellow