1000ft Category 6 Plenum 550MHZ UTP Ethernet Cable

(1 customer review)



10 in stock

1000 FT

Category 6 Plenum Cable:

This 1000ft category 6 plenum cable blue, green, white, yellow is the epitome of high quality. If you are to run cables in plenum spaces then look no further; this cable will serve your cabling needs. The cable is a 1000ft long bulk cable with plenum rated outer jacket in green color.

This cable exceeds the minimum requirements as for the data transfer and as for the bandwidth capacity laid down by Telecommunications Industry Association (TIA). The base standard base laid down by TIA/EIA for Cat6 is to support the performance of up to 250 MHz but our 1000ft category 6 plenum cable is rated to support performance up to 550 MHz. And concerning the data transfer rate, it can handle up to 10 Gbps. Moreover, it can handle the 10BASE-T, 100BASE-TX, 1000BASE-T, and 10GBASE-T standards.

The cable has four unshielded twisted pairs of 23 gauge, and eight solid conductors in total for good conductivity. The outer jacket is a durable CMP rated plenum jacket. The 1000ft category 6 plenum cable has a strong and thick sheath all over it which protects your system from cross talk. Cross talk is simply unwanted effect when signals get confused if the signal from a cable disturbs a signal from a cable that is nearby.  In simpler terms, this cross talk refers to signal bleedings. This can really affect the quality of your entire set up. This particular 1000ft category 6 plenum cable is designed to provide you with better resistance against cross talks like Near End Crosstalk (NEXT) and Alien Crosstalk (AXT) because it has strong sheathing, tighter twists and likewise. Thus, the data integrity of your system will be maintained, and there will be a cut down in the loss of data packets. Therefore, this cable will give you quality with a low bit error rate.  What it essentially means is, your data integrity will be protected and you will have smoother error-free setup.

The 1000ft category 6 plenum cable has been tested for CMP (FT6) plenum-ratings, and it conforms to the National Fire Association Standards. The insulation on the outside of the cable is made up of a special type of insulation which has certain low smoke and low flame properties to it. Because of this insulation, such a cable is a plenum rated cable. This plenum rated cable is required to be used in plenum spaces in a building. The plenum spaces are basically the areas where the air can circulate around the building. There is a requirement to use plenum rated cables to be used in such spaces because of how easily these spaces can catch fire. Therefore, we suggest you use 1000ft category 6 plenum cable to be installed in these spaces because the cable will not heat up and cause a fire in these spaces, and moreover in an event of a fire, these cables do not melt off with harmful smoke like regular plastic insulated cables do.

Cable Cat6 CMP 0.57±0.01mm
Wire Gauge 23 AWG
Conductor 0.57±0.01mm – 4 Twisted Pairs
Frequency 550 MHz
Jacket & Shielding CMP Jacket – Unshielded
Installation Temp 0°C to 60°C
Standard Compliances ISO/IES ROHS Compliant
Velocity Ratio 65%
Applications 100 Base-T4 – 100 Base-TX – 100VG – Any LAN – 1000 Base-T (Gigabit Ethernet) – 155 Mbps ATM – 622 Mbps AT
Spline Separating 4 pairs
Color Blue, White, Yellow, Green, and Red
Length & Package 1000 Feet 305Meter – EZ Pull Box

Based on 1 review

5.0 overall

Add a review

  1. admin

    Awesome quality.