Orange Cat6 Plenum Solid Bare Copper CMP 1000ft 550MHz Ethernet 23AWG UTP Cable

Cat6 Plenum Solid Copper 1000 Feet UTP Cable:

Our Orange Cat6 plenum cable pure copper has an extraordinary conductivity. We make its internal structure of high-quality 23 AWG wire. There are eight wires twisted together in four unshielded pairs and eight conductors in total. The frequency of this cable is 550MHz and the data transfer rate is 1Gbps.

We can use this cable for voice, video, and high-speed ethernet applications. Since it is a 1000ft cable, you’ll get it in an easy-pull box to avoid any hassle. Cat6 Plenum cable have been tested with a Fluke DTX-1800 Versiv Cable Analyzer and are in compliance with ANSI/TIA standards. The jacket of this cable is plenum-rating. You can install this cable in plenum spaces in your building. If you have any more questions, call us. Our customer support team will assist you. Order now and enjoy our amazing prices. There is also an easy return policy if there is something wrong with the cable.

Why Cat6 Plenum Solid Copper is fire-resistive?

This is a category 6 high-performance cable with 100% pure solid copper conductors and a plenum rated outer jacket that is orange in color. We test this Cat6 plenum solid copper cable for its superior specifications. It conforms to the highest market standards and agency codes. It is EIA/TIA verified and RoHS compliant. Therefore, it is ideal for applications like 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T(IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550 MHz Broadband Video Voice, T1, ISDN 155/622 Mbps ATM PoE (Power over Ethernet). This cable gives a very good response with a low budget. It is a cable that should provide you with high data transfer rate, exceptional attenuation, high bandwidth frequencies, high data integrity, low bit error rate, ability to eliminate cross-talk and other electromagnetic interferences and so much more.

We make our orange Cat6 plenum solid copper cable of special fire-resistive coatings and layerings. It has a special insulation that is plenum rated which is perfect for installation in plenum spaces. Plenum spaces have a high oxygen level in them because of the air circulation in such spaces. As a result, a plenum space can catch fire easily as compared to a regular non-plenum space.

Therefore, whenever you are supposed to install cables in a particular space, you must look as to whether that place is a plenum space or not because for plenum space you can not install any other cable. For plenum space, you must only use plenum rated cables like our premium quality Cat6 plenum solid copper cable. Our cable with the best quality plenum jacket is resistant to fire, and it even helps to hinder the flame progression in an event of a fire.

Orange Cat6 Plenum Cable

Cross talk is an undesired effect that can hinder the quality of your transmissions. It generates a loss in data packets and this affects the integrity of your data.  Cross talk occurs when a signal bleeds from a cable and confuses with another signal from another cable running nearby.

Therefore, when you have to install multiple cables near each other, you must consider how this undesired effect can be put down to an acceptable level. Our Cat6 plenum solid copper cable is specifically intended to cater to this so that your transmissions are protected against various forms of cross-talks like Power Sum Equal Level Far End Cross talk (PS-ELFEXT), Near-End Cross talk (NEXT) and Alien Crosstalk (AXT).

This solid copper cable features 23 American Gauge Wire AWG copper conductors, four UTP (unshielded twisted pairs) and eight solid conductors. It is certified to support high data transfer rates of 10/100/1000 Mbps and a high bandwidth capacity of up to 550 MHz. Additionally, this cable also caters for horizontal networking applications over distances up to 100 meters.