Cat6 1000ft Riser Ethernet UTP 23AWG Cable


Price: $79.99

Availability:

99 in stock

BlueWhiteBlackGreenYellowRed
1000 FT
Clear
Compare

This is a cat6 1000ft riser cable which has been thoroughly tested for all the category 6 standards, and industry norms. The cable is TIA/EIA verified, ETL listed and RoHS compliant, and you can use this cable ideally for 10BASE-T (Ethernet), 100BASE-TX (Fast Ethernet) 1000BASE-T (Gigabit Ethernet GbE) and 10BASE-T (10-Gigabit Ethernet).

This cable is capacitated with exceptional specifications for which has been tested. This high-performance cable is made of 23 American Gauge Wire AWG copper conductors. It contains four twisted pairs and eight solid conductors. It can support up to 550 MHz bandwidth speeds, and also it can support high Ethernet speeds up to 1000 Mbps or 10 Gbps speeds.

This cable carries twisted pair design. This twisted pair design is essential for many things. For instance, it helps with cross talks and interferences. The twists used are made to be tighter on purpose. The cable sheath is also made to be thicker. This all is helpful in cutting down cross talks and maintain excellent attenuation. Cross talk can be a very annoying issue, especially if you are running multiple cables close to each other, and also if high frequencies are involved. Our cables are made of thicker sheaths which gives you better protection against Near End Crosstalk (NEXT) and Alien Crosstalk (AXT). This means you can enjoy a low bit error rate in your set up. There will be fewer errors in your transmissions, as a result of which the data integrity will be protected.

The outer jacket on this cable is a riser-rated jacket that has been certified to be used in vertical applications, for instance, between floors. Whenever you are to install cables, you must look out for any plenum spaces because for such spaces it is mandated to install plenum rated cables. In the plenum spaces, air circulation produces high levels of oxygen due to which space itself can be very susceptible to fire. The oxygen can enhance fire progression and therefore, you must not use riser cables in these spaces because these cables are not strict with fire retardant insulations.

At New York Cables, we provide you high-quality cabling solutions: we carry high-performance cat6 1000ft riser cable and relevant cable accessories. These cables and their accessories are manufactured observing the market standards, and therefore their quality is remarkable.

CableCat6 CMR 0.57±0.01mm
Wire Gauge23 AWG
Conductor0.57±0.01mm – 4 Twisted Pairs
Frequency550 MHz
Jacket & ShieldingCMR Jacket – Unshielded
Installation Temp0°C to 60°C
Standard CompliancesISO/IES ROHS Compliant
Velocity Ratio65%
Applications100 Base-T4 – 100 Base-TX – 100VG – Any LAN – 1000 Base-T (Gigabit Ethernet) – 155 Mbps ATM – 622 Mbps AT
Spline Separating4 pairs
ColorBlue, White, Yellow, Green, and Red
Length & Package1000 Feet 305Meter – EZ Pull Box

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cat6 1000ft Riser Ethernet UTP 23AWG Cable”

There are no reviews yet.