1000ft Cat6 Riser 550 MHz Ethernet UTP 23AWG Cable – In Blue

Cat6 Riser 550 MHz Ethernet UTP 23AWG Cable:

This is a category 6 cable with a riser-rated jacket. Our Cat6 riser blue has a specially designed jacket to protect it from sunlight and UV. This feature makes it perfect to install in both indoor and outdoor spaces. This cable is ideal to be installed in vertical spaces. Cat6 riser is made of 23 AWG wire with four unshielded twisted pairs and eight conductors. It can support 550MHz bandwidth speed. This cable can also support Ethernet speeds up to 1000Mbps. You can use this cable for applications such as Ethernet, Fast Ethernet, and Gigabit Ethernet. This cable meets all the market standards for safety. It is TIA/EIA verified and RoHS compliant. It also has the certification of ISO 9001:2015. Since this is a bulk cable, there is an “ft” mark on the entire 1000 feet of the cable to make the measurement easier. Cat6 Riser Blue comes in a hassle-free easy-pull box. You’ll also get a lifetime warranty and easy return policy with this cable. Our customer support team is always here to assist you. Order now and get the premium-quality cable with free shipping.

Why Cat6 Riser has a twisted pair design?

This is a cat6 1000ft riser cable which has been thoroughly tested for all the category 6 standards, and industry norms. The cable is TIA/EIA verified, and RoHS compliant, and you can use this cable ideally for 10BASE-T (Ethernet), 100BASE-TX (Fast Ethernet) 1000BASE-T (Gigabit Ethernet GbE) and 10BASE-T (10-Gigabit Ethernet).
This cable is capacitated with exceptional specifications for which has been tested. This high-performance cable is made of 23 American Gauge Wire AWG. It contains four twisted pairs and eight. It can support up to 550 MHz bandwidth speeds, and also it can support high Ethernet speeds up to 1000 Mbps or 10 Gbps speeds
This cable carries twisted pair design. This twisted pair design is essential for many things. For instance, it helps with cross-talks and interferences. The twists used are made to be tighter on purpose. The cable sheath is also made to be thicker. This all helps cut down cross-talks and maintain excellent attenuation. Cross talk can be a very annoying issue, especially if you are running multiple cables close to each other, and also if high frequencies are involved. Our cables are made of thicker sheaths which gives you better protection against Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT). This means you can enjoy a low bit error rate in your set up. There will be fewer errors in your transmissions, as a result of which the data integrity will be protected.
The outer jacket on this cable is a riser-rated jacket that has been certified to be used in vertical applications, for instance, between floors. Whenever you are to install cables, you must lookout for any plenum spaces because for such spaces it is mandated to install plenum rated cables. In the plenum spaces, air circulation produces high levels of oxygen due to which space itself can be very susceptible to fire. The oxygen can enhance fire progression and therefore, you must not use riser cables in these spaces because these cables are not strict with fire retardant insulations.
At New York Cables, we provide you high-quality cabling solutions: we carry high-performance cat6 1000ft riser cable and relevant cable accessories. We manufacture these cables according to the market standards with premium quality.